LS600 PRODUCT FEATURES

Components:

LF 1 x 15" (38cm) long excursion Neodymium 8Ω driver.

Height x Width x Depth

435mm x 688mm x 528 mm (17.12" x 27.09" x 20.79").

Weight

30 kg (66 Lbs) net.

Connectors

2 x NL4MP SPEAKON 4 pole.

Construction

Baltic Birch Ply & textured, polyurethane black coating.

Fittings

Handles 2 Metal recessed pockets.

Flying Points

One plate connecting with external accessories.

Stand fittings

Internal Steel Stand Fitting on Top (35mm, 1 3/8") allows pole mounting for 1 PS10-R2.

SYSTEM SPECIFICATIONS LS600 with PS10 TDController-R2

Frequency Response

40 Hz - 110 Hz ±3dB.

Usable Range @-6dB

38 Hz - 120 Hz.

Sensitivity 1W @ 1m

101 dB SPL Nominal.

Nominal Peak SPL @ 1m

135 to 138 dB Peak.

Crossover Frequencies

120 Hz Active through PS10 TD Controller-R2.

Nominal Impedance

8 Ohms.

Recommended Amplifiers

1000 to 2000 Watts / 8 Ohms.

SYSTEM OPERATION

Electronic Controller

The LS600 Subwoofer must be used with a Nexo Controller (PS10TD -R2, NX242, or NXAMPS).

Use without a properly connected Controller will result in poor sound quality and may damage the

components.

Subbass

The LS600 Subwoofer provides optional VLF extension for PS10R2 Loudspeakers.

Active two-way operation with the PS10-R2 is included in the PS10TD-R2, NX242 or NXAMPS.

One LS600 matches 2 x PS10-R2, additional LS600 may be used for enhanced effect.

Speaker Cables

The PS10R2 is wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through

Speakons are present on both products. Single identical cables can thus be used to loop through

combinations of up to 2 x PS10R2 & 1 x LS600 in no particular order. As part of a policy of

continual improvement, NEXO reserves the right to change specifications without notice.

SHIPPING & ORDERING

Packaging

LS600 is packaged as a single product.

Shipping Weight&Volume

29.4 kg (64.68 lbs) / 0.265 cubic metres.