| SPECIFICATIONS | |
|
Frequency
Response @-6 dB | 45 Hz to 150
Hz |
| Sensitivity 1W@1m | 102 dB SPL
Nominal |
| Peak SPL@1m | 130 dB |
| Crossover Frequency | 45-85 Hz,
45-120 Hz, 45-150 Hz |
| Nominal Impedance | 6 Ω |
| Recommended Power | 450 to 700
Watts / 6 Ohms (requires a 700 to 1000 Watts / 4 Ohms amplifier) |
| |
|
FEATURES | |
| LF
Component | 1 x
Neodymium 12" 6 Ohms long excursion |
| Connectors | 2 pairs
(In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) |
| Compatible cables section | Cables from
0.75 mm² to 3.3 mm² (AWG 18 to 12) copper section |
| Compatible cables outside diameter | Cable with
maximum outside diameter of 9 mm |
| Rigging points | 4 x pairs of
M10 rigging points (two on each side) |
| Material | 15 mm thick
birch plywood body and Magnelis® grille |
| Finish | Black
structural paint (RAL9005 or Custom RAL upon request) |
| Front Finish | UV &
Fire resistant acoustic fabric |
| Height x Width x Depth | 365mm x
423mm x 450mm (14.4" x 16.7" x 17.7") |
| Weight: Net | 14.5 kg (32
lbs) |
| Operating temperature range | 0°C - 40 °C
(32° F - 104° F) |
| Storage temperature range | -20 °C - 60
°C (-4 ° F - 140° F) |
| IP Rating | IP54 |
| Recommended powering solution | NXAMP4x1mk2
Powered TDcontroller: up to 2 x eLS400 per channel |
| Optional powering solution | DTDcontroller
+ DTDAMP4x0.7 : 1 x eLS400 per channel |
| DTDcontroller
+ DTDAMP4x1.3 : 1 x eLS400 per channel |
| NXAMP4x2mk2
Powered TDcontroller: up to 3 x eLS400 per channel |
| NXAMP4x4mk2
Powered TDcontroller: up to 3 x eLS400 per channel
|
;){kind=link}